How to install iviewHD IPTV Multi-Room? 2023


Introducing a guide to utilizing iviewHD IPTV Multi-room in conjunction with your IPTV subscription. With the Family Package subscription, you can save 60% on the second device, allowing the entire family to enjoy the same live TV content. Experience significant savings collectively.

install-iviewhd-iptv-multi-room

How to setup iviewHD IPTV Multi-Room

Step1: Installed iviewHD plus APK on Device A(Master), install iviewHD plus Sub-Device APK on Device B(Sub- Device/Slave)

Note: Click here You can download, iviewHD plus & iviewHD plus sub-device

Step 2: Bind Sub-Device B to Device A by inputting the subscription active code whichever has been used on Device A.

Step 3: Fill in ā€˜Sub-Device Codeā€™ to Device B after Recharged then can watch Live Channels & VOD directly.

Pay attention: Each sub-device code is usable on only one device. Two sub-devices require two separate sub-device codes.

Click here to get a free IPTV trial.

In this post, we will show you The IPTV Multi-Room Solution Guide.

How to use iviewHD IPTV Multi-Room?

Of course, let’s initiate the process by elucidating the definitions of several crucial terms.

Device A (iviewHD plus APK), Device B (Sub-Device APK)
Subscription code:  iviewHD plus subscription code and Sub-Device code

If you are already using the iviewHD plus IPTV service and would like to add a device for your family, follow these steps to set it up.

Step 1: Installed iviewHD Plus Sub-Device APK on Device B (Sub-Device/Slave).
If your Device A did not install plus apk, please install it at the same time.

Step2: Enter the Plus Subscription code on Device B ( after done, that means Bind Sub-Device B to Device A, Device A become into Master Device).

Step 3: Fill in ā€˜Sub-Device Codeā€™ to Device B again after Recharged then can watch Live Channels & VOD directly.

Note: To qualify for the Family Package, ensure the validity of your iviewHD Plus subscription code. Continue reading for further information.

If you are a new user of iviewHD IPTV and have purchased the iviewHD Plus subscription and the Sub-device subscription, you will need to install and activate the iviewHD plus APK first and then repeat the above steps.

Manual Details as below:

Sub-Device Application:

Active Code
UserID

Type
Valid Until
e9123214143sc  
1111

Master Device
2021.06.08
2222
Sub-Device(Current Device)
2021.08.17
iviewHD

IPTV Sub-Device can only run Sub-Device Application and share the valid subscription of Master Device, Sub-Device doesnā€™t have its own subscription, Sub-Device cannot recharge any active code.

To Use the Sub-Device, there are two steps.
a. the user has to bind Sub-Device to Master Device by input any of the active codes whichever been used on Master Device after Sub-Device code has been bound successfully to the Master Device, the user shall be able to see the Master Device information as above Bold row.
b. the user has to recharge ā€˜Sub-Device Codeā€™ to active Sub-Device after Sub-Device Code has been recharged, the user shall be able to see the valid period of Sub-Device as an above Italics row.

Sub-Device can only recharge the ā€œSub-Device Codeā€œ. ā€œSub-Device Codeā€ doesnā€™t contain any subscription of channels. ā€œSub-Device Codeā€ can be only used to extend the valid period of the Sub-Device device. There are two kinds of Sub-Device Code: 3 days free and 12 months Paid.

If the subscription on the main device has expired, the sub-device also wonā€™t be able to access channels.

Sub-devices and Master Device can only function within the same household network.
If the Master Device and Sub Device are simultaneously operating on different networks, the user account will be blocked.
If not at the same time, Master Device or Sub Device can work from different Networks (Any place, different IP supported).

But hereā€™s the kicker:

Master Application : (normal iviewHD plus application)

Active CodeUserIDTypeValid Until
912321414912c1111Master(Current Device)2021.06.08 
 2222Sub-Device (STB)2022.08.11
 3333Sub-Device (PAD)2020.12.23
iviewHD
  1. One Master Device can support two Sub-Devices at maximum.
  2. If Master Device is broken, the user can move the subscription to a new Master Device without effect Sub-Device.

Sub-Device ID picture

iviewhd-active-code

Check out iviewHD IPTV and start a free trial here.

FAQ

What is Family Package / Multi-Devices / IPTV Multi-Room?

For our IPTV Family Package, can be known as Multi-Device IPTV or Multi-Room IPTV. When buying a 12-month Subscription code, then you can pay 60% OFF the price to buy Sub- Device Code to activate more devices for your family, max at 4 devices in total (1 Master Device and 3 Sub-Devices).
Family Package needs you to install ourĀ IPTV iviewHD plus APKĀ &Ā Sub-Device APK, both APKs support Android TV Box, Firestick, Android Phone, Android PAD, Samsung Phone, and so on.
One Device can be used in the Living room, the other device can be used in the sleeping room at the same time. Am I allowed to use each TV on different IP or ISP? Watching on one device, you can connect any TV to any Internet Provider in the world. Watching on over 2 devices at the same time, need to be under the same IP/ISP(ONE IP Network).

How many Devices/Rooms does the Family Package support?

Till now Family Package offers a max of 4 devices as IPTV Multi-Room / Multi-Devices subscription.
Note: One code is only for one device how to activate the 2nd / 3rd /4th devices? How to use Sub-Device Code?
1. Installed Sub-Device APK on the Sub Device (the second/third device).
2.Ā Bind Sub-Device to Master Device(the first device) by inputting subscription code(xxxxxxxxxxc) whichever been used on Master Device.
3.Ā Fill in Sub-Device Code(exxxxxxxxxxuc) to the 2nd/3rd/4th Devices, after the Sub-Device code has been recharged, can watch Live Channels & VOD directly.

What is the Master Device & Sub-Device?

A=Master Device, B=Sub-Device
1.Ā Install theĀ IPTV iviewHD plus version APKĀ on Device A.
Install theĀ Sub-Device APKĀ on Device B3.Ā After Activated Subscription code (xxxxxxxxxxc) on Device A, then bind Device B by filling in the same Subscription code (xxxxxxxxxxc) on Device B
4.Ā Then Device A becomes Master Device; device B becomes Sub-Device (Slave Device).

Is there any functional difference between Master Device & Sub-Device?

Master Device & Sub-Device?Ā 99% is the same, including all Live Channels & VOD. The only difference: Sub-Device does not haveĀ Cloud PVR Function. Because now the system does not support it.

Why there are two valid dates for Master Device & Sub-Device?

The Valid Date of the Master Device & Sub-Device can be the same or different. Because they are with each own date.

Summary

In conclusion, mastering the installation process of iviewHD IPTV Multi-Room opens up a world of entertainment possibilities for you and your family. With the convenience of synchronized content across multiple devices, the Family Package subscription offers substantial savings while ensuring everyone can indulge in their preferred live TV shows. Make the most of your IPTV subscription by seamlessly integrating iviewHD Multi-Room and elevate your viewing experience to new heights.

Ten articles before and after

Related Posts

New Pro IPTV Logo

About Monkey

Hi! I'm Monkey, As an avid streaming enthusiast, I joined Newproiptv.com to help others access and stream premium content on any platform. On this blog, I review services, write how-to articles, and report on the latest IPTV news and streaming trends.

Leave a Comment